1.4404–X2CrNiMo17-12-2–AISI/SAE316L1.4404或316L奧氏體冷庫保溫隔熱板的表層AISI原因其鉻和鉬的含量的高，碳的含量的低，316型具有著更好的耐氧化性。這對大長度，回火密度約為600MPa，而且這對小載面，行憑借螺母化來提生。304不銹鋼有多種有所差異不合格的倉庫的來源，或有所差異的類產品模式或形態，使您并能是最好的地提供您的方案訴求。他們的服務性基地也可能開發或切為一小片。數字化品牌：W、 序號1.4404–1.4401（316）–US S31603–316L規范標準：ISO7153-1、ASTM F899、NF S94-090、NF EN 10088-3和-2、ASTM A479、ASTM A276、X2CrNiMo17-12-2–AFNOR Z3CND17-11-2–BS 316S31

MATERIAL SPECIFICATIONS:BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C(％): ≤0.030Si(％): ≤1.00Mn(％):≤2.00P(％)≤:0.045S(％)≤:0.030Cr(％): 16.5～18.5Ni(％): 10.0～13.0Mo(％):2.00～2.50Other(％): N≤0.11

MECHANICAL PROPERTIES( BAR/WIRE ROD ) AND INTERGRANULAR CORROSION RESISTANT TENDENCYVIASOLUTION TREATMENT

Thickness Diameter (d)/≤mm: 160Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): 40Elongation δ(transversal )≥(％): -Impact absorbing energy Akv≥/J|longitudinal: 100Impact absorbing energy Akv≥/J|transversal: -Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: YesThickness Diameter (d)/≤mm: 160<d≤250Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): -Elongation δ(transversal )≥(％): 30Impact absorbing energy Akv≥/J|longitudinal: -Impact absorbing energy Akv≥/J|transversal: 60Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: Yes關鍵不同的用途無數用途涵蓋機械裝備、頁巖油化工、頁巖油、手表、種植業食品類和醫療機構儀器服務業的新產品。本身相關材料能否使用在大直徑不低于或小剖面的超高頻淬火(固溶處理)情況下。